Enquiry Now

Professional

China Manufacturer

China Factory

Fiber Cable Assemblies.

  • Specialized Fiber Optic Products Manufacturer Since 1995.

Enquiry Now

Professional

China Manufacturer

China Factory

Fiber Cable Assemblies.

40G QSFP LR4 Fiber Optic Transceiver

The QSFP-40G-LR4 is a transceiver module designed for 10Km optical communication applications. The design is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

40G QSFP LR4 Fiber Optic Transceiver Features:

4 CWDM lanes MUX/DEMUX design
Up to 11.2Gbps per channel bandwidth
Aggregate bandwidth of > 40Gbps
Duplex LC connector
Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard
QSFP MSA compliant
Up to 10 km transmission
Compliant with QDR/DDR Infiniband data rates
Single +3.3V power supply operating
Temperature range 0°C to 70°C
RoHS Compliant Part

40G QSFP LR4 Fiber Optic Transceiver Applications:

Rack to rack
Data centers Switches and Routers
Metro networks
Switches and Routers
40G BASE-LR4 Ethernet Links

The central wavelengths of the QSFP-40G-LR4 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.

The QSFP-40G-LR4 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

The QSFP-40G-LR4 operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals such as Module Present, Reset, Interrupt and Low Power Mode are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to obtain digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.

The QSFP-40G-LR4 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The sunrisephotonics 40G module offers very high functionality and feature integration, accessible via a two-wire serial interface.

  • Absolute Maximum Ratings
Parameter Symbol Min. Typical Max. Unit
Storage Temperature TS -40 +85 °C
Supply Voltage VCCT, R -0.5 4 V
Relative Humidity RH 0 85 %

 

  • Recommended Operating Environment:
Parameter Symbol Min. Typical Max. Unit
Case operating Temperature TC 0 +70 °C
Supply Voltage VCCT, R +3.13 3.3 +3.47 V
Supply Current ICC 1000 mA
Power Dissipation PD 3.5 W

 

  • Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.13 to 3.47 Volts
Parameter Symbol Min Typ Max Unit Note
Data Rate per Channel 10.3125 11.2 Gbps
Power Consumption 2.5 3.5 W
Supply Current Icc 0.75 1.0 A
Control I/O Voltage-High VIH 2.0 Vcc V
Control I/O Voltage-Low VIL 0 0.7 V
Inter-Channel Skew TSK 150 Ps
RESETL Duration 10 Us
RESETL De-assert time 100 ms
Power On Time 100 ms
Transmitter
Single Ended Output Voltage Tolerance 0.3 4 V 1
Common mode Voltage Tolerance 15 mV
Transmit Input Diff Voltage VI 150 1200 mV
Transmit Input Diff Impedance ZIN 85 100 115
Data Dependent Input Jitter DDJ 0.3 UI
Receiver
Single Ended Output Voltage Tolerance 0.3 4 V
Rx Output Diff Voltage Vo 370 600 950 mV
Rx Output Rise and Fall Voltage Tr/Tf 35 ps 1
Total Jitter TJ 0.3 UI

Note:

  1. 20~80%
  • Optical Parameters(TOP = 0 to 70 °C, VCC = 3.0 to 3.6 Volts)
Parameter Symbol Min Typ Max Unit Ref.
Transmitter
Wavelength Assignment L0 1264.5 1271 1277.5 nm
L1 1284.5 1291 1297.5 nm
L2 1304.5 1311 1317.5 nm
L3 1324.5 1331 1337.5 nm
Side-mode Suppression Ratio SMSR 30 dB
Total Average Launch Power PT 8.3 dBm
Average Launch Power, each Lane -7 2.3 dBm
Difference in Launch Power between any two Lanes (OMA) 6.5 dB
Optical Modulation Amplitude,each Lane OMA -4 +3.5 dBm
Launch Power in OMA minus
Transmitter and Dispersion Penalty(TDP), each Lane -4.8 dBm
TDP, each Lane TDP 2.3 dB
Extinction Ratio ER 3.5 dB
Transmitter Eye Mask Definition {X1,X2, X3, Y1, Y2, Y3} {0.25, 0.4,0.45,0.25,0.28, 0.4}
Optical Return Loss Tolerance 20 dB
Average Launch Power OFF Transmitter, each Lane Poff -30 dBm
Relative Intensity Noise Rin -128 dB/HZ 1
Optical Return Loss Tolerance 12 dB
Receiver
Damage Threshold THd 3.3 dBm 1
Average Power at Receiver Input, eachLane R -13.7 2.3 dBm
Receiver Power (OMA), each Lane 3.5 dB
Receive Electrical 3 dB upper Cut offFrequency, each Lane 12.3 GHz
RSSI Accuracy -2 2 dB
Receiver Reflectance Rrx -26 dB
Receiver Power (OMA), each Lane 3.5 dBm
Stressed Receiver Sensitivity inOMA, each Lane    – -9.9   dBm
Receiver Sensitivity, each Lane SR    – -11.5 dBm
Difference in Receive Power betweenany two Lanes (OMA) 7.5 dB
Receive Electrical 3 dB upper CutoffFrequency, each Lane 12.3 GHz
LOS De-Assert LOSD -15 dBm
LOS Assert LOSA -30 dBm
LOS Hysteresis LOSH 0.5 dB

Note: 12dB Reflection

  • Timing for Soft Control and Status Functions
Parameter Symbol Max Unit Conditions
Initialization Time t_init 2000 ms Time from power on1, hot plug or rising edge of Reset until the module is fully functional2
Reset Init Assert Time t_reset_init 2 μs A Reset is generated by a low level longer than the minimum reset pulse time present on the ResetL pin.
Serial Bus Hardware Ready Time t_serial 2000 ms Time from power on1 until module responds to data transmission over the 2-wire serial bus
Monitor Data ReadyTime t_data 2000 ms Time from power on1 to data not ready, bit 0 of Byte 2, deasserted and IntL asserted
Reset Assert Time t_reset 2000 ms Time from rising edge on the ResetL pin until the module is fully functional2
LPMode Assert Time ton_LPMode 100 μs Time from assertion of LPMode (Vin:LPMode =Vih) until module power consumption enters lower Power Level
IntL Assert Time ton_IntL 200 ms Time from occurrence of condition triggering IntL until Vout:IntL = Vol
IntL Deassert Time toff_IntL 500 μs toff_IntL 500 μs Time from clear on read3 operation of associated flag until Vout:IntL = Voh. This includes deassert times for Rx LOS, Tx Fault and other flag bits.
Rx LOS Assert Time ton_los 100 ms Time from Rx LOS state to Rx LOS bit set and IntL asserted
Flag Assert Time ton_flag 200 ms Time from occurrence of condition triggering flag to associated flag bit set and IntL asserted
Mask Assert Time ton_mask 100 ms Time from mask bit set4 until associated IntL assertion is inhibited
Mask De-assert Time toff_mask 100 ms Time from mask bit cleared4 until associated IntlL operation resumes
ModSelL Assert Time ton_ModSelL 100 μs Time from assertion of ModSelL until module responds to data transmission over the 2-wire serial bus
ModSelL Deassert Time toff_ModSelL 100 μs Time from deassertion of ModSelL until the module does not respond to data transmission over the 2-wire serial bus
Power_over-ride orPower-set Assert Time ton_Pdown 100 ms Time from P_Down bit set 4 until module power consumption enters lower Power Level
Power_over-ride or Power-set De-assert Time toff_Pdown 300 ms Time from P_Down bit cleared4 until the module is fully functional3

Note:

  1. Power on is defined as the instant when supply voltages reach and remain at or above the minimum specified value.
  2. Fully functional is defined as IntL asserted due to data not ready bit, bit 0 byte 2 de-asserted.
  3. Measured from falling clock edge after stop bit of read transaction.
  4. Measured from falling clock edge after stop bit of write transaction.
Top